 |
 |
 |
The new generation - Pro X3 |
||||
|
||||
The QC metrology system works on the conventional 2 dimensional CCD technology. Over a 12x motorized zoom objective and a CCD color camera, the images of the parts, are grapped and measured. Light sources such as LED sector ring light, coaxial light, cold ring light and sector under light stand for illuminating the most different surfaces for order. All light sources and zoom positions are free programmable. Measuring tools such as circle tool, buffer tool, contour tracing, centre of graphity etc. can probe at almost all objects. From the won measuring points constructions are possible such as distances, angles, points etc. in each kind of way. The free report creation as well as exporting of the data into different formats are integrated in the system. The z – axes measurement is made by automatic focus of the image. |
||||
Scanning System The scan technology is the new kind of the measuring technique, were the high speed begins. The parts are scanned with a track width of 80mm and a scanning speed of 180mm per second. Thus the entire available table range with the dimensions of 700 x 650 mm can be scanned in only 49 seconds with a pixel resolution of 10µm. Naturally the scan range can be adapted to the products automatically, that the scanning time accordingly is thus decreased.
The scan application is divided into 2 main groups. The hole scan measurement and contour scan measurement.
|
 |
|||
The hole measurement on a PCB board (500x600mm) with 200.000 holes takes less than 1 minute. All holes are examined for the position, size, missing or over counting. The measuring accuracy is within ±0.005mm over the entire measuring range. The smallest object that can be measured is 60µm.
Nibbling or milled Slots are automatically recognized and measured for position, angle, length and width.
The input data set, for which the measured objects are examined, must be present in the DXF format. This data record can be produced also with the implemented converter from drilling and milling data. The available formats are Excellon I & II, S&M, Posalux etc.. A direct data access from Genesis DXF is just as possible.
The scanning system is extremely simple to handle and needs no further programming. A integrated Wizard leads the operator step by step to the finished measuring report within 2 minutes.
Multiple diagrams and statistics are available for the user. Scatter chart, position analyses, filter functions, statistics. It is present everything. If objects were badly evaluated, those can be digitized displayed or over the CCD camera on different light attitudes live regarded. The ProX3 is to be accomplished ideal for the 100% control of the drilled parts with the highest precision.
|
||||
