© 2013 Impex Leiterplatten GmbH. All Rights Reseved.
Professional Cleaning with Ionized Air
Cleaning of panels with electrostatic charged dust
ACS stands for Air Cleaning System by Impex and was developed to
clean in a professional way panels with electrostatic charged dust.
In our focus were Printed Circuit Boards in different production
processes.
Compact maintence free system!
The ACS is a compact system with a very easy handling for the
operator. The benefits are the small design and so the small needed
ground space. It cleans panels with a width of 100-600mm (3,9-
23,7Inch) and a height of 120-650mm (4,7-25,6Inch). The panel
thickness must be between 1mm and 10mm (0,04-0,4Inch). The drive
moves the panel automatically into the machine and cleans it with 2 air
knifes. After the cleaning it send the panel back. The operator can
control the movement speed and air pressure to realize best results
without damaging the panels.
Cleaning via Ion Air Knife
The panel passes two "Ion Air Knifes" during the movement. The Air Knifes are equipped with an ionization bar.
The air removes electrostatic charges from the panel. Exhausting systems remove the drill or routing dust from
the ACS.
Technical Data
Panel Width
100-600mm (3,9-23,7 Inch)
Panel Height
120-650mm (4,7-25,6 Inch)
Panel Height
1-10mm (0,04-0,4 Inch)
Controlling
PLC
Machine Size W x H x D
1000x1100x530mm (39x43,3x20,9 Inch)
Weight
~ 120kg
Exhausting Negative Pressure
min. -100mbar
Input Size Pressured Air
19mm (0.75 Inch)
Input Size Exhausting System
50mm (1,97 Inch)
Electrical Power
230V, 50Hz, 13A
Air Pressure
min. 6bar
Benefits
•
Low air consumption
•
Low panel deformation
•
Isolated, not radioactive
•
Non-stop air flow
•
40:1 air amplifying
Cleaning of drilled panels
Cleaning of routed panels
PARTNER